Multistage kinetic analysis of DMAA/MBAM polymer removal from gelcast ceramic parts using a multi-stage parallel reaction model and model-free method

RSC Advances Pub Date: 2019-08-30 DOI: 10.1039/C9RA04489B

Abstract

This work aims to develop an effective method for investigating the multistage debinding kinetics and reaction mechanisms of removing N,N-dimethylacrylamide/N,N′-methylenebisacrylamide (DMAA/MBAM) polymer from gelcast ceramic parts. Thermogravimetry (TG) and pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS) experiments were performed to investigate the thermal degradation characteristics and the main compounds produced during the pyrolysis of DMAA/MBAM polymer within green components. A multi-stage parallel reaction model (M-PRM) was proposed to separate the overlapping peaks in the dα/dT curves. The kinetic parameters (activation energy E and pre-exponential factor k0) of each substage were calculated using model-free methods (Flynn–Wall–Ozawa, Starink, Friedman and Kissinger–Akahira–Sunose) and an activation energy variable model. In addition, the most appropriate kinetic mechanism function f(α) of each substage was analyzed and discussed via Málek's procedure and the ?esták–Berggren (SB) model. The results showed that the DMAA/MBAM polymer burnout in green components can be divided into three substages through a three-stage parallel reaction model (3-PRM). The values of E (Friedman method) for substages 1 to 3 were E(α) = 139.862 ? 110.481α + 156.161α2 ? 88.714α3 kJ mol?1, E(α) = 160.791 + 152.496α ? 236.906α2 + 163.724α3 kJ mol?1 and E(α) = 72.132 + 452.830α ? 669.039α2 + 507.015α3 kJ mol?1, respectively. The average values of E showed an increasing tendency from substages 1 to 3, and a kinetic compensation effect was also observed between the E and k0 in each substage. The kinetic mechanism analysis revealed that the reaction mechanisms for substages 1 to 3 were f(α) = (1 ? α)0.668α3.049(?ln(1 ? α))?3.874, f(α) = (1 ? α)0.700α3.177(?ln(1 ? α))?3.962 and f(α) = (1 ? α)1.049α?0.161(?ln(1 ? α))0.518, respectively. It is expected that the research results can be extended to investigate the multiplex debinding of binders or polymers for various colloidal molding techniques.

Graphical abstract: Multistage kinetic analysis of DMAA/MBAM polymer removal from gelcast ceramic parts using a multi-stage parallel reaction model and model-free method
Recommended Literature