Effect of Ni/Co mass ratio and NiO–Co3O4 loading on catalytic performance of NiO–Co3O4/Nb2O5–TiO2 for direct synthesis of 2-propylheptanol from n-valeraldehyde?
RSC Advances Pub Date: 2021-01-05 DOI: 10.1039/D0RA08903F
Abstract
In the direct synthesis of 2-propylheptanol (2-PH) from n-valeraldehyde, a second-metal oxide component Co3O4 was introduced into NiO/Nb2O5–TiO2 catalyst to assist in the reduction of NiO. In order to optimize the catalytic performance of NiO–Co3O4/Nb2O5–TiO2 catalyst, the effects of the Ni/Co mass ratio and NiO–Co3O4 loading were investigated. A series of NiO–Co3O4/Nb2O5–TiO2 catalysts with different Ni/Co mass ratios were prepared by the co-precipitation method and their catalytic performances were evaluated. The result showed that NiO–Co3O4/Nb2O5–TiO2 with a Ni/Co mass ratio of 8/3 demonstrated the best catalytic performance because the number of d-band holes in this catalyst was nearly equal to the number of electrons transferred in hydrogenation reaction. Subsequently, the NiO–Co3O4/Nb2O5–TiO2 catalysts with different Ni/Co mass ratios were characterized by XRD and XPS and the results indicated that both an interaction of Ni with Co and formation of a Ni–Co alloy were the main reasons for the reduction of NiO–Co3O4/Nb2O5–TiO2 catalyst in the reaction process. A higher NiO–Co3O4 loading could increase the catalytic activity but too high a loading resulted in incomplete reduction of NiO–Co3O4 in the reaction process. Thus the NiO–Co3O4/Nb2O5–TiO2 catalyst with a Ni/Co mass ratio of 8/3 and a NiO–Co3O4 loading of 14 wt% showed the best catalytic performance; a 2-PH selectivity of 80.4% was achieved with complete conversion of n-valeraldehyde. Furthermore, the NiO–Co3O4/Nb2O5–TiO2 catalyst showed good stability. This was ascribed to the interaction of Ni with Co, the formation of the Ni–Co alloy and further reservation of both in the process of reuse.
Recommended Literature
- [1] An ion-gating multinanochannel system based on a copper-responsive self-cleaving DNAzyme? Yang Chen,Di Zhou,Zheyi Meng,Jin ZhaiChem. Commun., 2016,52, 10020-10023 10.1039/C6CC03943J
- [2] An air-stable organometallic polymer containing titanafluorene moieties obtained by the Sonogashira–Hagihara cross-coupling polycondensation? Alvin Tanudjaja,Shinsuke Inagi,Fusao Kitamura,Toshikazu Takata,Ikuyoshi TomitaDalton Trans., 2021,50, 3037-3043 10.1039/D0DT03663C
- [3] Alternative synthesis of the anti-baldness compound RU58841? RSC Adv., 2014,4, 14143-14148 10.1039/C4RA00332B
- [4] An approach to biodegradable star polymeric architectures using disulfide coupling? Jingquan Liu,Huiyun Liu,Zhongfan Jia,Volga Bulmus,Thomas P. DavisChem. Commun., 2008, 6582-6584 10.1039/B817037A
- [5] An analysis of the WTC fires using CIB correlations and simple modeling JGQuintiere 10.1177/0734904121989670
- [6] An atmosphere and light tuned highly diastereoselective synthesis of cyclobuta/penta[b]indoles from aniline-tethered alkylidenecyclopropanes with alkynes? Bo Cao,Yin WeiChem. Commun., 2018,54, 2870-2873 10.1039/C8CC00180D
- [7] An all-solid-state asymmetric device based on a polyaniline hydrogel for a high energy flexible supercapacitor? Hamid Heydari,Mohammad B. GholivandNew J. Chem., 2017,41, 237-244 10.1039/C6NJ02266A
- [8] Aluminium complexes with thio-phosphorus ligands: syntheses and characterisations of [Al2(CyPS3)2(CyPHS2)2] and [Al(S2PPh2)3]? Robert P. Davies,Maria A. Giménez,Laura Patel,Andrew J. P. WhiteDalton Trans., 2008, 5705-5707 10.1039/B813427H
- [9] An investigation of surface properties, local elastic modulus and interaction with simulated pulmonary surfactant of surface modified inhalable voriconazole dry powders using atomic force microscopy Michael Kappl,Paul M. Young,Daniela Traini,Sanyog JainRSC Adv., 2016,6, 25789-25798 10.1039/C6RA01154C
- [10] An apparatus for testing water by measurement of its electrical conductivity Analyst, 1912,37, 538-543 10.1039/AN9123700538
Journal Name:RSC Advances
research_products
-
CAS no.: 89640-58-4