Nanoscale palladium as a new benchmark electrocatalyst for water oxidation at low overpotential?
Journal of Materials Chemistry A Pub Date: 2019-03-12 DOI: 10.1039/C9TA01198F
Abstract
There is an overwhelming desire to discover new catalytic materials for efficient water oxidation that perform at low overpotentials (below 1.50 V vs. RHE), and which exhibit tremendous stability along with high oxygen evolution reaction (OER) current density over a small potential window. However, it remains a challenge to establish a competent solar to fuel conversion system. We present here the first example of a nanoscale nanoporous Pd-derived benchmark material used as a highly stable and low overpotential electrocatalyst for water oxidation. The Pd electrocatalyst executes water oxidation at an onset potential of just 1.43 V vs. RHE; η = 200 mV. The catalyst also exhibits remarkable performance for OER, reaching a current density of 10 mA cm?2 at 1.47 V (η = 240 mV), and with a current density of 100 mA cm?2 achieved at only 1.63 V (η = 400 mV), which represents better OER activity than that of the benchmark IrO2 electrocatalyst (301 mV and 313 mV required to drive a current density of 10 mA?cm?2). Furthermore, the catalyst demonstrates a Tafel slope of 40 mV dec?1, a high mass activity of 560 mA mg?1 (MA) and a large TOF value of 0.2 s?1, and exhibits remarkable long-term stability for use in oxygen evolution experiments. A thin-film Pd electrocatalyst was obtained via the Aerosol-Assisted Chemical Vapor Deposition (AACVD) method on conducting surfaces. XRD and XPS analyses showed a phase-pure crystalline metallic Pd deposit. A surface morphology study revealed a nanoparticulate highly porous nanostructure. Our study reveals a straightforward method for the development of the first example of a Pd-derived nanoporous electrocatalyst for high-efficiency water oxidation and for chemical energy conversion.
Recommended Literature
- [1] An aptasensor for the detection of ampicillin in milk using a personal glucose meter Xixi Li,Nanwei Zhu,Ruohan Li,Qinpu ZhangAnal. Methods, 2020,12, 3376-3381 10.1039/D0AY00256A
- [2] An amorphous Cu–In–S nanoparticle-based precursor ink with improved atom economy for CuInSe2 solar cells with 10.85% efficiency? Green Chem., 2017,19, 1268-1277 10.1039/C6GC03280J
- [3] An atomistic mechanism for the degradation of perovskite solar cells by trapped charge? Eunhak Lim,Jiyoung Heo,Seong Keun KimNanoscale, 2019,11, 11369-11378 10.1039/C9NR02193K
- [4] An algal process treatment combined with the Fenton reaction for high concentrations of amoxicillin and cefradine Haitao Li,Yu Pan,Zhizhi Wang,Shan Chen,Ruixin Guo,Jianqiu ChenRSC Adv., 2015,5, 100775-100782 10.1039/C5RA21508K
- [5] An investigation into the origin of variations in photovoltaic performance using D–D–π–A and D–A–π–A triphenylimidazole dyes with a copper electrolyte? Govind ReddyMol. Syst. Des. Eng., 2021,6, 779-789 10.1039/D1ME00073J
- [6] An all-solid-state imprinted polymer-based potentiometric sensor for determination of bisphenol S? Rongning Liang,Tanji Yin,Ruiqing Yao,Wei QinRSC Adv., 2016,6, 73308-73312 10.1039/C6RA14461F
- [7] Alumina coating on 5 V lithium cobalt fluorophosphate cathode material for lithium secondary batteries – synthesis and electrochemical properties? S. Amaresh,K. Karthikeyan,K. J. Kim,Y. S. LeeRSC Adv., 2014,4, 23107-23115 10.1039/C4RA02318H
- [8] An anti-leakage liquid metal thermal interface material Kaiyuan Huang,Wangkang Qiu,Meilian Ou,Xiaorui Liu,Zenan Liao,Sheng ChuRSC Adv., 2020,10, 18824-18829 10.1039/D0RA02351E
- [9] Aluminium complexes with thio-phosphorus ligands: syntheses and characterisations of [Al2(CyPS3)2(CyPHS2)2] and [Al(S2PPh2)3]? Robert P. Davies,Maria A. Giménez,Laura Patel,Andrew J. P. WhiteDalton Trans., 2008, 5705-5707 10.1039/B813427H
- [10] An investigation of new infrared nonlinear optical material: BaCdSnSe4, and three new related centrosymmetric compounds: Ba2SnSe4, Mg2GeSe4, and Ba2Ge2S6? Kui Wu,Zhihua Yang,Shilie PanDalton Trans., 2015,44, 19856-19864 10.1039/C5DT03215F
Journal Name:Journal of Materials Chemistry A
research_products
-
CAS no.: 89640-58-4