A novel mixture of diethylene glycol diethylether and non-flammable methyl-nonafluorobutyl ether as a safe electrolyte for lithium ion batteries?
Journal of Materials Chemistry A Pub Date: 2015-09-14 DOI: 10.1039/C5TA05242D
Abstract
A mixture of diethylene glycol diethylether and non-flammable methyl-nonafluorobutyl ether was introduced as a new electrolyte for lithium ion batteries. And a fluoroethylene carbonate additive was used in this electrolyte to improve the compatibility with the graphite anode. The non-flammability and high flash point of this electrolyte indicated its high safety. This electrolyte had low viscosity and its conductivity reached 3.8 mS cm?1 at 25 °C. Graphite/LiFePO4 coin cells with commercial electrodes were utilized to evaluate the performances of the electrolyte. The rate, cycle and low-temperature performances of the graphite/LiFePO4 cells using this electrolyte were close to those of the cells using the conventional electrolytes with and without the fluoroethylene carbonate additive. These results indicated that this kind of safe electrolyte based on non-flammable hydrofluoroethers and solvents with a high flash point has great potential for practical application.
Recommended Literature
- [1] Acetylcholinesterase amperometric detection system based on a cobalt(II) tetraphenylporphyrin-modified electrode Analyst, 1996,121, 1123-1126 10.1039/AN9962101123
- [2] An apparatus for determining small amounts of alchohol in sour milk and urine Analyst, 1964,89, 272-275 10.1039/AN9648900272
- [3] An integrated droplet-digital microfluidic system for on-demand droplet creation, mixing, incubation, and sorting? Lab Chip, 2019,19, 524-535 10.1039/C8LC01170B
- [4] An assessment of strategies for the development of solid-state adsorbents for vehicular hydrogen storage Mark D. Allendorf,Alauddin Ahmed,Tom Autrey,Jeffrey Camp,Eun Seon Cho,Maciej Haranczyk,Abhi Karkamkar,Di-Jia Liu,Katie R. Meihaus,Iffat H. Nayyar,Roman Nazarov,Donald J. Siegel,Vitalie Stavila,Jeffrey J. Urban,Srimukh Prasad Veccham,Brandon C. WoodEnergy Environ. Sci., 2018,11, 2784-2812 10.1039/C8EE01085D
- [5] Acentric and chiral heterometallic inorganic–organic hybrid frameworks mediated by alkali or alkaline earth ions: synthesis and NLO properties Huabin Zhang,Shaowu DuCrystEngComm, 2014,16, 4059-4068 10.1039/C3CE42419G
- [6] An atomistic mechanism for the degradation of perovskite solar cells by trapped charge? Eunhak Lim,Jiyoung Heo,Seong Keun KimNanoscale, 2019,11, 11369-11378 10.1039/C9NR02193K
- [7] An approach to C–N activation: coupling of arenesulfonyl hydrazides and arenesulfonyl chlorides with tert-amines via a metal-, oxidant- and halogen-free anodic oxidation?? M. Sheykhan,S. Khani,S. Shaabanzadeh,M. JoafshanGreen Chem., 2017,19, 5940-5948 10.1039/C7GC03141F
- [8] An integrated microfluidic 3D tumor system for parallel and high-throughput chemotherapy evaluation? Dan Liu,Rui Hu,Zhongchao Huang,Meilin Sun,Kai HanAnalyst, 2020,145, 6447-6455 10.1039/D0AN01229G
- [9] An autonomous self-optimizing flow machine for the synthesis of pyridine–oxazoline (PyOX) ligands? Eric Wimmer,Daniel Cortés-Borda,Solène Brochard,Elvina Barré,Charlotte Truchet,Fran?ois-Xavier FelpinReact. Chem. Eng., 2019,4, 1608-1615 10.1039/C9RE00096H
- [10] An aqueous ammonia sensor based on an inkjet-printed polyaniline nanoparticle-modified electrode Karl Crowley,Eimer O'Malley,Aoife Morrin,Malcolm R. Smyth,Anthony J. KillardAnalyst, 2008,133, 391-399 10.1039/B716154A
Journal Name:Journal of Materials Chemistry A
research_products
-
CAS no.: 89640-58-4