Accessing suberin from cork via ultrafast supercritical hydrolysis?
Green Chemistry Pub Date: 2022-10-07 DOI: 10.1039/D2GC02498E
Abstract
Natural biopolyesters in the form of suberin could be a promising resource for the synthesis of a wide array of chemicals, fuels and materials. However, access to this molecule is limited by a chemical-intensive and laborious work-up procedure based on alkaline hydrolysis or methanolysis. Herein, we propose the ultrafast supercritical hydrolysis as a novel and scalable approach for the facile access to suberin from cork. Supercritical water (SCW) with high or low ionic properties (pKw of 13 and 15) would allow the liquefaction of lignocellulosic materials while avoiding the hydrolysis of ester linkages. Therefore, extractives and carbohydrates partition in aqueous products while suberin and lignin are enriched in the solid products. Suberin yield reached as high as 66.6% of the dry cork at 386 °C and 1.27 s (pKw = 13), owing to the removal of up to 94.7% of polysaccharides content of the original cork biomass. The occurrence of repolymerization reaction, however, was observed under this condition, including an increase in Klason lignin presumably due to pseudo-lignin formation. Meanwhile, lower repolymerization products accompanied by a 77.1% polysaccharides and 14% lignin removal was achieved when working at 395 °C and 0.25 s (pKw = 15), at the expense of lower suberin yield of 59.8%. It appears that even a longer reaction time of 1.27 s would not lead to hydrolysis of ester linkages in suberin but influences the extent of liquefaction of the lignocellulosic matrix and the formation of repolymerization products. A lower ion product and a reaction time of less than 1 s would be preferable to strike a balance between maximum polysaccharides removal and minimum repolymerization products generation. This study has contributed towards the development of a new sustainable process to access valuable molecules from cork and has highlighted the importance of obtaining high quality and highly functionalized biopolymers as a source of new building blocks.
Recommended Literature
- [1] An integrated cathode and solid electrolyte via in situ polymerization with significantly reduced interface resistance? Jialiang Yuan,Ran Dong,Yuan Li,Yang Liu,Zhuo Zheng,Yuxia Liu,Yan Sun,Benhe Zhong,Zhenguo Wu,Xiaodong GuoChem. Commun., 2021,57, 13004-13007 10.1039/D1CC04485K
- [2] An integrated droplet-digital microfluidic system for on-demand droplet creation, mixing, incubation, and sorting? Lab Chip, 2019,19, 524-535 10.1039/C8LC01170B
- [3] An integrated microfluidic platform for sensitive and rapid detection of biological toxins? Robert J. Meagher,Anson V. Hatch,Ronald F. Renzi,Anup K. SinghLab Chip, 2008,8, 2046-2053 10.1039/B815152K
- [4] An algal process treatment combined with the Fenton reaction for high concentrations of amoxicillin and cefradine Haitao Li,Yu Pan,Zhizhi Wang,Shan Chen,Ruixin Guo,Jianqiu ChenRSC Adv., 2015,5, 100775-100782 10.1039/C5RA21508K
- [5] An air-stable organometallic polymer containing titanafluorene moieties obtained by the Sonogashira–Hagihara cross-coupling polycondensation? Alvin Tanudjaja,Shinsuke Inagi,Fusao Kitamura,Toshikazu Takata,Ikuyoshi TomitaDalton Trans., 2021,50, 3037-3043 10.1039/D0DT03663C
- [6] An asymmetric supercapacitor based on controllable WO3 nanorod bundle and alfalfa-derived porous carbon? Kanjun Sun,Fengting Hua,Shuzhen Cui,Yanrong Zhu,Hui Peng,Guofu MaRSC Adv., 2021,11, 37631-37642 10.1039/D1RA04788D
- [7] Acentric and chiral heterometallic inorganic–organic hybrid frameworks mediated by alkali or alkaline earth ions: synthesis and NLO properties Huabin Zhang,Shaowu DuCrystEngComm, 2014,16, 4059-4068 10.1039/C3CE42419G
- [8] An amorphous Cu–In–S nanoparticle-based precursor ink with improved atom economy for CuInSe2 solar cells with 10.85% efficiency? Green Chem., 2017,19, 1268-1277 10.1039/C6GC03280J
- [9] An assessment of strategies for the development of solid-state adsorbents for vehicular hydrogen storage Mark D. Allendorf,Alauddin Ahmed,Tom Autrey,Jeffrey Camp,Eun Seon Cho,Maciej Haranczyk,Abhi Karkamkar,Di-Jia Liu,Katie R. Meihaus,Iffat H. Nayyar,Roman Nazarov,Donald J. Siegel,Vitalie Stavila,Jeffrey J. Urban,Srimukh Prasad Veccham,Brandon C. WoodEnergy Environ. Sci., 2018,11, 2784-2812 10.1039/C8EE01085D
- [10] Alternative mixtures to R-600a. Theoretical assessment and experimental energy evaluation of binary mixtures in a commercial cooler: Mélanges alternatifs au R-600a. évaluation théorique et évaluation énergétique expérimentale de mélanges binaires dans un refroidisseur commercial. DanielCalleja-Anta,DanielSánchez,LauraNebot-Andres,RamónCabello,RodrigoLlopis 10.1016/j.ijrefrig.2023.05.009
Journal Name:Green Chemistry
research_products
-
CAS no.: 89640-58-4