Determination of phosphite in a full-scale municipal wastewater treatment plant

Environmental Science: Processes & Impacts Pub Date: 2014-12-09 DOI: 10.1039/C4EM00543K

Abstract

Phosphite (HPO32?, +3), a reduced P species in the P biogeochemical cycle, was monitored in a full-scale municipal wastewater treatment plant (MWTP) that uses an anaerobic/anoxic/aerobic-membrane bioreactor (A2/O-MBR) technology for treating mixed wastewater (56% industrial wastewater and 44% domestic wastewater) from June 2013 to May 2014. Wastewater samples were collected from influent after having gone through the fine grille, anaerobic tank, anoxic tank, and aerobics tank, respectively. The final stage yielded effluent. Results confirmed the presence of phosphite in the MWTP ranging from 4.62 ± 1.00 μg P L?1 to 34.30 ± 3.49 μg P L?1 in influent and from 1.15 ± 0.5 μg P L?1 to 4.42 ± 0.9 μg P L?1 in effluent. Phosphite accounted for approximately 0.15% to 2.27% of total soluble phosphorus (TSP). During the A2/O-MBR process, the average removal of phosphite was 82.41 ± 7.45%. The anaerobic biological treatment removed the most phosphite from wastewater in this study. Spatially, phosphite concentrations decreased gradually as the wastewater treatment process progressed. Seasonally, the phosphite concentrations in spring and winter were higher than those in summer and autumn. The phosphite concentration in effluent was of the same order of magnitude as that in nearby natural water, which suggested MWTP effluent may be an important phosphite contributor to the natural water.

Graphical abstract: Determination of phosphite in a full-scale municipal wastewater treatment plant
Recommended Literature