Construction and analytical application of ion-selective piezoelectric sensor for atropine sulfate

Analyst Pub Date: DOI: 10.1039/A904432I

Abstract

The method describes the use of a piezoelectric quartz crystal (PQC) as a substitute for ion-selective electrodes. The approach is feasible when the membrane materials are electrically non-conductive and membrane potential measurements are consequently not possible. An ion-selective piezoelectric sensor sensitive to atropine sulfate was constructed by coating a PVC membrane containing activant on one side of a PQC. On the basis of selective adsorption of atropine ions across the modified film and the sensitive mass response of PQC, the method exhibits a sensitive, rapid response and is easy to operate without pretreatment of the sample. The logarithm of the frequency shift gave a linear relationship with the logarithm of atropine sulfate concentration in the 1.0 × 10–8–1.0 × 10–3 M range with a detection limit of 5.0 × 10–9 M at pH 7.0. Recoveries were from 98.7–102.2%. Two activants, atropine tetraphenylborate and atropine dipicrylaminate, were synthesized and investigated. Influencing factors were also examined and optimized. The results for real samples obtained by the proposed method agreed with those obtained by conventional methods.

Recommended Literature